CLNBD - A-1104 PRIMER FOR PLASTISOL COATINGS
- MSDS: CLNBD
- Manufacturer: Q C M CO
- Product Name: A-1104 PRIMER FOR PLASTISOL COATINGS
- National Stock Number: 8030-01-331-8446
Product Identification
Product ID:A-1104 PRIMER FOR PLASTISOL COATINGS
MSDS Date:05/05/1998
FSC:8030
NIIN:01-331-8446
Status Code:A
MSDS Number: CLNBD
Responsible Party
KENT, WA 98032-6105
US
Emergency Phone: 1-800-424-9300
Info Phone: 253-859-0933, FAX 253-859-0935
Preparer: ERNEST CARTER
Cage: 8L872
Contractor
Telephone: 253-859-0933, FAX 253-859-0935
Cage: 8L872
Ingredients
METHYL ETHYL KETONE
CAS: 78-93-3
RTECS: EL6475000
OSHA PEL 590 MG/M3;200 PPM
ACGIH TLV: 590 MG/M3;200 PPM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ETHANOL
CAS: 64-17-5
RTECS: KQ6300000
OSHA PEL 1900 MG/M3;1000 PPM
ACGIH TLV: 1880 MG/M3;1000 PPM
Hazards
Effects of Overexposure:SKIN, EYE, RESPIRATORY AND GASTROINTESTINAL
IRRITATION, POSSIBLY SEVERE. EXCESSIVE INHALATION. MAY PRODUCE
CENTRAL NERVOUS SYSTEM DEPRESSION.
First Aid
First Aid:EYE CONTACT: IMMEDIATELY FLUSH WITH LARGE AMOUNTS OF WATER
FOR AT LEAST 15 MINUTES. SEEK MEDICAL ATTENTION. SKIN CONTACT:
REMOVE CONTAMINATED CLOTHING. WASH THOROUGHLY WITH SOPA AND WATER.
INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN IF NECESSARY.
INGESTION: SEEK IMMEDIATE MEDICAL ATTENTION. DO NOT INDUCE
VOMITING.
Fire Fighting
Flash Point Method:TCC
Flash Point:=-8.7C, 16.F
Lower Limits:1.8%
Upper Limits:19.0%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:USE SELF CONTAINED BREATHING APPARATUS WITH
FULL FACEPIECE. COOL CONTAINERS IN VICINTY WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:KEEP ALL IGNITION SOURCES AWAY. GROUND
ALL CONTAINERS. VAPORS MAY TRAVEL TO SOURCE OF IGNITION AND CAUSE
FLASHBACK, FIRE CAUSES ACID SMOKE AND/OR FUMES.
Accidental Release
Spill Release Procedures:REMOVE ALL IGNITION SOURCES. SMALL SPILLS:
TAKE UP WITH ABSORBENT MATERIAL LARGE SPILLS: DAM AND RECOVER.
Handling
Handling and Storage Precautions:AVOID HIGH TEMPERATURE AREA AND
IGNITION SOURCES. ALL HANDLING EQUIPMENT SHOULD BE GROUNDED AND
EXPLOSION PROOF. AVOID ALL PERSONAL CONTACT. WASH THOROUGHLY AFTER
HANDLING.
Other Precautions:DOT CLASS: FLAMMABLE LIQUID (METHYL ETHYL KETONE).
Exposure Controls
Respiratory Protection:USE APPROVED SELF CONTAINED BREATHING APPARATUS
IF NECESSARY.
Ventilation:LOCAL EXHAUST: NECESSARY MECHANICAL (GENERAL) NECESSARY
Protective Gloves:RUBBER OR NEOPRENE
Eye Protection:CHEMICAL SPLASH GOGGLE
Other Protective Equipment:SAFETY SHOWER EYE WASH STATION
Supplemental Safety and Health
Chemical Properties
Boiling Pt:=73.9C, 165.F
Vapor Pres:4.6
Vapor Density:2.4
Spec Gravity:0.86
VOC Pounds/Gallon:692
VOC Grams/Liter:5.78
Solubility in Water:APPRECIABLE
Appearance and Odor:CLEAR TO AMBER LIQUID, KETONE ODOR
Percent Volatiles by Volume:86%
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:STRONG ACIDS OR OXIDIZERS, HIGH
TEMPERATURES
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
MISCELLANEOUS HYDROCARBON.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:ACCORDING TO STATE, FEDERAL, AND LOCAL
REGULATIONS. HAZARDOUS WASTE CODE: F005,D001.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.